villa56 escribió:
Hola...
Según el catálogo GJ existen tres tipos:
- 772. Papel tizado, sobrecarga horizontal
- 773. Papel tizado, sobrecarga hacia arriba
- 774. Papel mate importado, hacia arriba.
Al no aclararme mucho con los papeles, consulto el catálogo de CEFILOZA donde indican la posición de la filigrana.
Vemos que se indica un encapado inglés. Me imagino el tizado por GJ
Y vemos que indican dos tipos de mates. GJ solamente uno.
Tengo estos dos sellos con filigrana al lado menor. El segundo sello sería papel tizado?
Según GJ sería el nº 773?.
En CEFILOZA no indican valor a esta posición de la sobrecarga. Hacia arriba. Es común?
Le adjunto también una comparativa de las dos sobrecargas. Me imagino que no es significativo, pero hay algunas diferencias.
También vemos un "despegue" en la C.
Espero comentarios. Gracias.
Omar.
100p Bariloche with vertical S.Oficial
Moderador: Rein
- Rein
- Usuario Colaborador
- Mensajes: 6258
- Registrado: 13 Mar 2009 15:59
- Ubicación: Leiden, Netherlands
- Contactar:
100p Bariloche with vertical S.Oficial
Subject: 100p. Bariloche. Dudas sobrecarga XIV
- Rein
- Usuario Colaborador
- Mensajes: 6258
- Registrado: 13 Mar 2009 15:59
- Ubicación: Leiden, Netherlands
- Contactar:
Re: 100p Bariloche with vertical S.Oficial

The two in the middle are on German paper produced by Kupferschmidt. Orthogonal watermark with a symmetrical paper sieve structure!
Second from the left:



Third from the left:



Both have the out-dent at the left of the "C"!
- Rein
- Usuario Colaborador
- Mensajes: 6258
- Registrado: 13 Mar 2009 15:59
- Ubicación: Leiden, Netherlands
- Contactar:
Re: 100p Bariloche with vertical S.Oficial
The other two are on English paper produced by Wiggins Teape. Parallel watermark with an Asymmetrical paper sieve structure!
First from the left:



Fourth from the left:



N.B. The first from the left has NO out-dent at the left of the "C" !!!!
First from the left:



Fourth from the left:



N.B. The first from the left has NO out-dent at the left of the "C" !!!!
- Rein
- Usuario Colaborador
- Mensajes: 6258
- Registrado: 13 Mar 2009 15:59
- Ubicación: Leiden, Netherlands
- Contactar:
Re: 100p Bariloche with vertical S.Oficial
This NOT the answer!Gracias Leo por anunciarnos en el Foro. Un especial agradecimiento a jorgec que nos escribió al Centro,
mostrándonos unos cuantos sellos Ministeriales con sobrecarga falsa, los que fueron reemplazados o
retirados. También nos indicó de algunos sellos que son de dudosa existencia, unos fueron retirados y otros
nos convenció de dejarlos sin Unidad Filatélica. Lo catastrófico fue el $100 Esquiador, teníamos el papel
Mate Inglés con la filigrana paralela al lado mayor, cuando en realidad es al lado menor, igual que el
Encapado Inglés.
There is still ONE version missing in CEFILOZA Gz catalogue:
Wiggins Teape [English] paper Uncoated with the "C" without ex-dent (at the bottom):

- Rein
- Usuario Colaborador
- Mensajes: 6258
- Registrado: 13 Mar 2009 15:59
- Ubicación: Leiden, Netherlands
- Contactar:
Re: 100p Bariloche with vertical S.Oficial
The vertical S.O. WITHOUT ex-dent in the "C" was mistaken for coated paper! It was printed on W.T. uncoated paper.Rein escribió:
..................
There is still ONE version missing in CEFILOZA Gz catalogue:
Wiggins Teape [English] paper Uncoated with the "C" without ex-dent (at the bottom):
The vertical S.Oficial on coated paper does NOT exist!
The vertical S.Oficial on Wiggins Teape paper does exist in TWO versionS depending on the "C"! This was not recognized by CEFILOZA [as more stamps did not find their way there

- Rein
- Usuario Colaborador
- Mensajes: 6258
- Registrado: 13 Mar 2009 15:59
- Ubicación: Leiden, Netherlands
- Contactar:
Re: 100p Bariloche with vertical S.Oficial
Wiggins Teape paper has a parallel watermark; Kupferschidt an orthogonal watermark.
All have the direction of paper horizontal so this results in the WT version having "AR" parallel tot the small side of rthe stamp, in the case of the Kupferschmidt the "AR" parallel tot the long side of the stamp.
All have the direction of paper horizontal so this results in the WT version having "AR" parallel tot the small side of rthe stamp, in the case of the Kupferschmidt the "AR" parallel tot the long side of the stamp.