P & R I Partial plating of the 30c using an MH block
Moderador: Rein
P & R I Partial plating of the 30c using an MH block
30cMH1E2 pane used for partial plating: the pane
Here is a partial plating of the 30c from a block of 89 of the 30c-MH (Hacienda) 1E2. This block is missing position 95 and the 10th column. I find that the plate was made either with two blocks of 50 dies (top and bottom halves), or with four quadrants of 25 each. The plate does not have enough wear for me to conclusively prove that halves or quarters were used. In these pages I line up each row from the top half with its counterpart in the bottom half.
Here is a partial plating of the 30c from a block of 89 of the 30c-MH (Hacienda) 1E2. This block is missing position 95 and the 10th column. I find that the plate was made either with two blocks of 50 dies (top and bottom halves), or with four quadrants of 25 each. The plate does not have enough wear for me to conclusively prove that halves or quarters were used. In these pages I line up each row from the top half with its counterpart in the bottom half.
sitio Ingles/Español de P y R I
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
Re: P & R I Partial plating of the 30c using an MH block
30cMH1E2 pane used for partial plating: the overprint
Here are the ones that look fairly different from the norm.
Position 2
Position 3
Position 13
Position 14
Position 21
Position 23
Position 28
Position 33
Position 35
Position 39
Position 43
Position 49
Position 52
Position 58
Position 62
Position 64
Position 83
Position 86
Position 91
Position 92
Position 93
Here are the ones that look fairly different from the norm.
Position 2
Position 3
Position 13
Position 14
Position 21
Position 23
Position 28
Position 33
Position 35
Position 39
Position 43
Position 49
Position 52
Position 58
Position 62
Position 64
Position 83
Position 86
Position 91
Position 92
Position 93
sitio Ingles/Español de P y R I
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
Re: P & R I Partial plating of the 30c using an MH block
30cMH1E2 pane used for partial plating: the quadrants
Here are the major varieties for each position. If the stamp has more than one plate flaw, I have only kept here the one that is useful to figure out how the plate was assembled.
Upper Left
Upper Right
Lower Left
Lower Right
Here are the major varieties for each position. If the stamp has more than one plate flaw, I have only kept here the one that is useful to figure out how the plate was assembled.
Upper Left
Upper Right
Lower Left
Lower Right
sitio Ingles/Español de P y R I
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
Re: P & R I Partial plating of the 30c using an MH block
30cMH1E2 pane used for partial plating: rows 0 and 5
Position 2
Position 3
Position 5
Position 7
Position 9
Position 51
Position 53
Position 54
Position 55
Position 57
Position 59
Position 2
Position 3
Position 5
Position 7
Position 9
Position 51
Position 53
Position 54
Position 55
Position 57
Position 59
sitio Ingles/Español de P y R I
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
Re: P & R I Partial plating of the 30c using an MH block
30cMH1E2 pane used for partial plating: rows 1 and 6
Position 11
Position 12
Position 13
Position 14
Position 16
Position 17
Position 19
Position 64
Position 65
Position 66
Position 67
Position 69
Position 11
Position 12
Position 13
Position 14
Position 16
Position 17
Position 19
Position 64
Position 65
Position 66
Position 67
Position 69
sitio Ingles/Español de P y R I
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
Re: P & R I Partial plating of the 30c using an MH block
30cMH1E2 pane used for partial plating: rows 2 and 7
Position 23
Position 25
Position 28
Position 71
Position 72
Position 73
Position 75
Position 78
Position 23
Position 25
Position 28
Position 71
Position 72
Position 73
Position 75
Position 78
sitio Ingles/Español de P y R I
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
Re: P & R I Partial plating of the 30c using an MH block
30cMH1E2 pane used for partial plating: rows 3 and 8
Position 33
Position 36
Position 38
Position 81
Position 83
Position 87
Position 33
Position 36
Position 38
Position 81
Position 83
Position 87
sitio Ingles/Español de P y R I
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
Re: P & R I Partial plating of the 30c using an MH block
30cMH1E2 pane used for partial plating: rows 4 and 9
Position 41
Position 42
Position 44
Position 46
Position 47
Position 49
Position 91
Position 93
Position 94
Position 96
Position 97
Position 99
Position 41
Position 42
Position 44
Position 46
Position 47
Position 49
Position 91
Position 93
Position 94
Position 96
Position 97
Position 99
sitio Ingles/Español de P y R I
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
- Rein
- Usuario Colaborador
- Mensajes: 6258
- Registrado: 13 Mar 2009 15:59
- Ubicación: Leiden, Netherlands
- Contactar:
Re: P & R I Partial plating of the 30c using an MH block
rubiera escribió:30cMH1E2 pane used for partial plating: the pane
Here is a partial plating of the 30c from a block of 89 of the 30c-MH (Hacienda) 1E2. This block is missing position 95 and the 10th column. I find that the plate was made either with two blocks of 50 dies (top and bottom halves), or with four quadrants of 25 each. The plate does not have enough wear for me to conclusively prove that halves or quarters were used. In these pages I line up each row from the top half with its counterpart in the bottom half.
Tony,
I would start from a root block of 2x5 via 5x5 through to 10x10!? This would mean the columns 5 and 6 being pretty similar!
- Rein
- Usuario Colaborador
- Mensajes: 6258
- Registrado: 13 Mar 2009 15:59
- Ubicación: Leiden, Netherlands
- Contactar:
Re: P & R I Partial plating of the 30c using an MH block
The red and the green indicated dots repeat alternately; the blue ones are in every stamp!
The dot belongs to the back-ground colour:
The slash belongs to the back-ground colour:
Re: P & R I Partial plating of the 30c using an MH block
Thanks, Rein. I looked all over for these posts and couldn't find them. I knew that you had done some work on these.
tony
tony
sitio Ingles/Español de P y R I
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
- Rein
- Usuario Colaborador
- Mensajes: 6258
- Registrado: 13 Mar 2009 15:59
- Ubicación: Leiden, Netherlands
- Contactar:
Re: P & R I Partial plating of the 30c using an MH block
Tony,rubiera escribió:Thanks, Rein. I looked all over for these posts and couldn't find them. I knew that you had done some work on these.
tony
I had some trouble finding them myself! Contributing some 2500 postings in 16 months is asking for trouble! And if the board is splitting things up in anglosaxon and castellano you do not really know how and where to look!
rc2500
Re: P & R I Partial plating of the 30c using an MH block
and I looked really hard because I did not want to reinvent the wheel. I knew for sure you had done some work....anyways.
tony
tony
sitio Ingles/Español de P y R I
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/
http://www.somestamps.com/arg3551/index.htm
sitio general:
http://www.somestamps.com/
blog de P y R I en Ingles
http://arg3551.blogspot.com/