Direction of Printing - Dirección de la impresión

Moderador: Rein

Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Direction of Printing - Dirección de la impresión

Mensaje por Rein »

The notion "direction of printing" may sound familiar to you, but probably just in the context of the UK Machins.

The phenomenon had been discovered by Douglas Myall ("Deegam") in 1973 who applied this to the Machin stamps of the UK to tell some coil stamps or booklet stamps apart from the usual counter sheet stamps.

At more or less the same time the phenomenon was also discovered by Huig Tielman in the Netherlands who saw it in the 25c Queen Juliana booklet stamps that had been printed in reels with the left half upright and the other half upsidedown. He could thus tell booklets originating from the left from those from the right!

Huig inspired me to have a good look at all photogravure printed stamps and I found out that you could establish the direction of printing basically in all stamps that had been printed with cylinders so not just in photogravure but also in offset-litho and in recess!

I gave the four directions - the preferential direction where the ink would flow - the codes B [oven = upwards], O [onder = downwards], L [to the left] and R [ to the right]. I'm using this way of denoting the directions of printing since 1974.

Imagen

GOOGLE:

El concepto de "dirección de impresión" puede sonar familiar, pero probablemente sólo en el contexto de la Machins Reino Unido.

El fenómeno había sido descubierto por Douglas Myall ( "Deegam") en 1973, que aplicado a los sellos Machin del Reino Unido para contar algunas estampillas o sellos bobina folleto aparte de la hoja de sellos habituales de venta libre.

En más o menos al mismo tiempo el fenómeno fue descubierto por Huig Tielman en los Países Bajos que lo vio en la 25c sellos de la reina Juliana folleto que había sido impreso en rollos con la mitad izquierda arriba y la otra mitad abajo. De este modo podría decir folletos procedentes de la izquierda de los de la derecha!

Huig me inspiró a tener una buena mirada a todos los sellos impresos fotograbado y descubrí que se podía establecer la dirección de la imprenta, básicamente, en todos los sellos que habían sido impresas con cilindros no tan sólo en huecograbado, sino también en litografía offset y en los recreos!

Le di las cuatro direcciones - la dirección preferencial, donde la tinta se derivarían - B códigos [horno = hacia arriba], O [onder = abajo], L [a la izquierda] y R [a la derecha]. Estoy utilizando esta forma de designar a la dirección de la impresión desde 1974.
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Dirección de la impresión

Mensaje por Rein »

When the reel [or sheet] of already printed stamps is coming out of the press the not yet dried ink will stay behind a little bit and thus flow - as seen standing in front of the press - backwards! The direction of printing thus corresponds to the direction of where the stamps are that still need to be printed. NOT the direction of where the already printed stamps are going!

In studying Argentinian postage stamps - thanks to Antonio Rubiera in getting me so far :) - I found some nice examples of the direction of printing:

GOOGLE:

Cuando la bobina [o sheet] de sellos impresos ya está saliendo de la prensa, la tinta aún no se seca se quedará un poco y por lo tanto el flujo - como visto en pie delante de la prensa - al revés! La dirección de la impresión por lo tanto corresponde a la dirección de donde están los sellos que aún deben ser impresos. No la dirección de donde los sellos impresos ya van!

En el estudio de los sellos postales de Argentina - gracias a Antonio Rubiera en llegar tan lejos :) - He encontrado algunos buenos ejemplos de la dirección de la impresión:


Imagen

The ink is flowing to the left - La tinta fluye hacia la izquierda: :

Imagen

The ink is flowing to the right - La tinta fluye hacia la derecha:

Imagen

You can clearly see the horizontal waves the ink forms as well!

This can happen when the printing cylinders get mounted the other way around; should the directions of printing have been perpendicular then we certainly have 2 different cylinders used. I will show some examples of that later..

GOOGLE:

Se puede ver claramente las ondas horizontales de la tinta de las formas como así!

Esto puede suceder cuando los cilindros de impresión recibe montado al revés, si la dirección de la impresión han sido perpendicular a continuación, sin duda tenemos 2 cilindros empleadas. Voy a mostrar algunos ejemplos de los que más tarde ..
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Direction of Printing - Dirección de la impresión

Mensaje por Rein »

stamps9407 escribió:
Hola, encontré este sello, donde parece que hay o una doble impresión del azul o un corrimiento de tinta?, su oponión es apreciada

Imagen

1044b - Doble impesión del azul


Saludos
Sergio
Sergio,

no es una doble impresión! Tinta fluye con la dirección de la impresión como el sello de Australia o los sellos 5 pesos !
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Direction of Printing - Dirección de la impresión

Mensaje por Rein »

viewtopic.php?p=31730#p31730

Subject: El raro sello 1169a F/F 30p Colecc.sellos postales
juso escribió:Esta es mi ultima adquisicion el raro tizado F/F 1169a 30p "Colecciones sellos postales", ademas de este esta el tizado F/N, el neutro N/N y los mates.Al estudiarlo me encontre con estas caracteristicas que muestro en el grafico siguiente comparandolo con el otro tizado F/N, entonces me surgieron las siguientes preguntas:
Porque me muestra dos colores en cada detalle de la viñeta?...es como primero se imprimio el color verde-amarillento y despues el verde oscuro pero desfasado de aquel, y la cosa viene de abajo hacia arriba, cosa que no ocurre con el F/N?, el porque de la mancha en el borde inferior del sello?....el ejemplar que tengo esta Mint....por eso deduszco que hay un error de impresion....ahora....solo se dio en esta plancha donde viene este sello ? o me sirve como patron general para identificarlo de los otros, es decir del F/N, utilizando estas caracteristicas para identificarlo sin utilizar la lampara UV ?, porque si no es asi , este seria una variedad y buscaria otro para compararlo. Si alguien tiene este sello comparelo y por favor diganme si es igual al que tengo o no, para poder esclarecer estas dudas que tengo con respecto a este hermoso sello de los papeles modernos....

Imagen

saludos....

javier

Javier!

the 30c you displayed has been printed on normal coated paper! That is, the so-called "mate" is also coated but with a heavy layer of "clay" that reacts "strange" to the green ink. This modified paper hardly allows the ink to flow in a particular direction as it normally should - especially as these stamps have been printed on the Goebel reel-fed printng press!

There is NO second colour! This phenomenon is called "direction of printing" and was noticed about 1973 by Douglas Myall for the UK Queen Elisabeth Machin stamps!

http://www.stampboards.com/viewtopic.php?f=13&t=11346


saludos, Rein
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Direction of Printing - Dirección de la impresión

Mensaje por Rein »

Rein escribió:Direction of printing for the black colours!

Imagen
Imagen
Imagen
Imagen
The direction of printing is still subject of some discussion!
villa56 » 26 Jan 2011 09:53 escribió:
Hola de nuevo a todos. Creo que la voy a liar un poco. Espero que "piensen" antes de contestar . Me voy a referir solamente a este sello.
Son 10 ejemplares. Los 5 de arriba y el primero por la izquierda de abajo, fosforescentes (gracias Luis). Los 4 últimos, fluorescentes.

Imagen
.
Ahora viene mi hipótesis:

Los sellos fosforescentes fueron impresos en máquina de 5 cuerpos, es decir: Cyan, Amarillo, Magenta, "gris" y negro.
Esta última plancha de negro solamente en las letras y números y algunos detalles para intensificar color y sombras.
Como vemos hay un gris con trama más tupida que la segunda impresión del negro con trama más abierta (puntos y espacios mayores).

Imagen

En la siguiente imagen vemos el desplazamiento (para mí, mal registro del gris y el negro) en el número 3. Pero si nos fijamos en 1, solamente vemos una pequeña "sombra" gris (mal registrada con los otros 3 colores). Pero no aparece un negro por debajo como tendría que ser. Sin embargo en 2, sí aparece debajo del gris una trama de negro. Para intensificar color y dar profundidad a la flor. Comprobé esta trama y es exactamente igual a la trama del negro de las letras y números. En grado y separación.

Imagen

Sigo en el siguiente post.

villa56
A 5th colour for the grey shadows is what Omar is suggesting!

to be continued ....
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Direction of Printing - Dirección de la impresión

Mensaje por Rein »

villa56 » 26 Jan 2011 10:01 escribió:
Ahora vamos con el fluorescente (gracias Luis ). En primer lugar vemos que ya no hay "gris". Solamente puntos negros y blanco.

Imagen

Si comparamos fosfo y fluo, vemos que la trama primera del negro no tiene nada que ver con el negro del fluo.

Imagen

Si vemos un detalle mal registrado en la flor, vemos que no existe el gris y hay solamente punto negros plenos.

Imagen

Como conclusión y espero no "ofender" a nadie y siempre en mi modesta opinión, estos sellos se imprimieron con distintas técnicas.
El fosforescente a cinco colores y el fluorescente a 4 tintas.
SI APARECE ALGÚN SELLO FLUORESCENTES CON LAS LETRAS "BORROSAS", ACEPTARÍA MI EQUIVOCACIÓN.

Why does the grey comes out only in the phosphorescent stamps and not in the fluorescent ones???

to be continued .....
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Direction of Printing - Dirección de la impresión

Mensaje por Rein »

villa56 » 26 Jan 2011 12:07 escribió: Gracias amigo Rein por tu MP. Desconocía que ya habían tratado este tema en este post:

viewtopic.php?f=139&t=3519

Seguramente es esto lo que ocurre y no las 5 "tintas". Pero me sigue la duda porqué no ocurre en los fluorescentes.
Perdón por vuestro tiempo. Seguimos aprendiendo .
Omar.
I did give Omar the suggestion to read this general thread on the Direction of Printing!
Otin » 29 Jul 2010 19:03 escribió: En el sello de letras nítidas el cyan y el magenta estãn fuera de registro. En el de letras borrosas todos los colores están en perfecto registro. Las letras salieron borrosas porque seguramente el cilindro de impresión del color negro estaba imprimiendo desajustado o el papel que llegaba a ese color no tenía la tensión suficiente y entonces "patina". En otras palabras, el contacto del papel debe ser una tangente, o sea que cuando el cilindro impresor lo toca debe hacerlo en un solo punto de la circunferencia que constituye la sección del cilindro. Es evidente que aquí ese contaco fue mayor y me imagino que le faltaba tensión al papel. Saludos.
Merlo
According to José Merlo the excessive flow of ink is due to a bad tension of the paper making the cylinder not just touch the reel but sticking to it for a split second...

Imagen

to be continued . ....
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Direction of Printing - Dirección de la impresión

Mensaje por Rein »

Otin » 27.01.2011 21:33 escribió: Omar:
La máquina Goebel usada para la impresión de esta serie tenía solo tres cilindros para los colores y uno para el negro. No había lugar para uno del "gris". La observación sobre la absorción de tinta según el papel es muy respetable pero ahora ya es muy difícil comprobarlo. Merlo

Otin
villa56 » 28.01.2011 05:50 escribió:
Muchas gracias Sr. Merlo por su tiempo... y ya que estamos ... en los ejemplares que tengo de esta serie $a (pocos ),
siempre ocurre esta "aparición" del gris en los fosforescente. En los fluo, no. Es cuestión de papeles?. Si es así, en esta serie, tenemos fácil distinguir fosfo de fluo, sin utilizar lámpara, no?.
Muchas gracias nuevamente. Omar.
The question why just the phosphorescent paper [or to a much lesser degree this phenomenon - of excessive ink flow - occurs in fluorescent paper] is somehow clear now. The paper tension was different.

Photogravure stamps ALWAYS have a preferential direction in which the ink is flowing NO MATTER what the PAPER TENSION is!

to be continued ....
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Direction of Printing - Dirección de la impresión

Mensaje por Rein »

In Huig Tielman's discovery of the DOP there were no spikes or rounds! The Dutch stamps being printed in autotypical photogravure had a very loose screen i.e. the dots mostly were completely separated from each other [and did not have the same surface - surface-variable hence the autotypical] and the load of ink can be seen "falling down"

Imagen


Imagen

Imagen

Imagen

Huig was the first in the Netherlands to realize the importance of this discovery! The two of us did subsequently managed to establish the direction of printing for all Dutch commemoratives and for most of the definitives! Although for the latter we are still to expect some surprises!

I am sure Douglas M. would NOT have seen the phenomenon in these Dutch stamps had he ever seen them at all.... ;)

By the way, these stamps have a very thin outline that prevents us the see the spikes etc.... as they are not there! A few years later the 25c stamp was issued without these outlines!

to be continued ....
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Direction of Printing - Dirección de la impresión

Mensaje por Rein »

All stamps - as they are displayed here in this position - have the ink flowing downwards. Huig Tielman referred to this as "A" where the other half of the cylinder would have "B" [ink flowing upwards]. The stamps come from Dutch booklets with their numbering that practically almost was incorporated in the text of the booklet.

The 25c stamp with the outline!

Booklet 9:

Imagen

The stamps without the outlines:

Booklet 13:

Imagen

Booklet 13:

Imagen

Booklet 14:
Imagen


to be continued ...
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Direction of Printing - Dirección de la impresión

Mensaje por Rein »

The stamps without the outlines:

Booklet 14:

the green line is where the ink is not present between the screen dots, the purple line is where the ink fills the space and the dots are joined together....

Imagen

Imagen

Imagen


Booklet 13:

Imagen

Imagen


Booklet 13:

Imagen

After 40 years since its discovery I will not be surprised that anyone still has difficulties with establishing the DOP's in the case of the autotypical Queen Juliana Regina printings!


to be continued ...
Otin
Usuario Colaborador
Usuario Colaborador
Mensajes: 2028
Registrado: 16 Feb 2010 19:45

Re: Direction of Printing - Dirección de la impresión

Mensaje por Otin »

Rein,
The direction of printing can be detected when the doctor blade is not properly adjusted. It´s a consecuence of how the angle of the doctor blade´s edge touches the cylinder.

La dirección de la impresión puede ser detectada cuando la racleta no está ajustada correctamente. Es la consecuencia, a veces, de cómo el ángulo de la racleta, su filo, toca el cilindro impresor. Nuestr nuevo amigo mejicano en la parte de las rayas en el huecograbado Filatelia enel idioma de Shakespeare, con Rein, da dos interesnatísimos links que hablan al respecto.
Merlo
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Direction of Printing - Dirección de la impresión

Mensaje por Rein »

Otin escribió:Rein,
The direction of printing can be detected when the doctor blade is not properly adjusted. It´s a consecuence of how the angle of the doctor blade´s edge touches the cylinder.

La dirección de la impresión puede ser detectada cuando la racleta no está ajustada correctamente. Es la consecuencia, a veces, de cómo el ángulo de la racleta, su filo, toca el cilindro impresor. Nuestr nuevo amigo mejicano en la parte de las rayas en el huecograbado Filatelia enel idioma de Shakespeare, con Rein, da dos interesnatísimos links que hablan al respecto.
Merlo
José,

No,

the direction of printing can be established in practically all cases of photogravure with tradtional etchings no matter whether the doctor blade is functioning OK! With a properly functioning doctor blade there will be still enough ink in the screen dots that tend to get out of them! Screen dots are often not filled! Just the edges give ink! It is the rotation that causes the preferential movement of the ink!

The direction of printing (DOP) has been established by me for most photogravure stamps I have ever seen from the very first of Bavaria in 1914 onwards... The fact that sheet-fed was used first and later reel-fed did not play a role! Only after the introduction of the EME I found it often hard to establish the DOP...

saludos, Rein
Otin
Usuario Colaborador
Usuario Colaborador
Mensajes: 2028
Registrado: 16 Feb 2010 19:45

Re: Direction of Printing - Dirección de la impresión

Mensaje por Otin »

Rein,
For me it´s hard to believe that screen dots sometimes are not filled. If we consider that printing cylinder is submerged in an ink vat, unless air gets into the screen dot cell, the cell must be filled.
José
filatemusico
Usuario Nuevo
Usuario Nuevo
Mensajes: 127
Registrado: 20 Jul 2012 09:31
Ubicación: Guadalajara, MX

Re: Direction of Printing - Dirección de la impresión

Mensaje por filatemusico »

Hola José
Estoy de acuerdo con Rein, en el porque un sello muestra la dirección de la impresión.

Las celdillas son como pequeños vasos contenedores de tinta, si usted inclina un vaso debido a la fuerza de gravedad el liquido buscará ir hacia abajo, mas aparte, si le agregamos la inercia por el movimiento se concentrará mayormente en las paredes contrarias a la dirección del movimiento la concentración es tanta que el papel no alcanza a absorberla lo suficientemente rapido y expulsa la tinta que no puede absorber, las celdilla superiores estarán un poco más vacías.

Este es un caso extremo donde la tinta es demasiado fluida, si no sucediera esto la tinta explotaría de la misma forma para todos lados.

I agree with Rein why stamps show direction of printing
The cells are like little ink container vessels, if you tilt a vessel the gravity will do liquid go down besides you move the vessel up liquid is going to be concentrate in the opposite wall of movement, the paper do not absorb ink fast enough then ink is expelled, upper cell will be emptier.

This is a extreme case where ink is too fluid, if ink does not flow like Rein says then ink explode in all directions in the same way.

Saludos.
José Leal
No tienes los permisos requeridos para ver los archivos adjuntos a este mensaje.
Última edición por filatemusico el 07 Dic 2012 12:28, editado 1 vez en total.
Responder

Volver a “Papers and printing methods”